What is ISO 2177:2003 Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution?
ISO 2177:2003 specifies a method for the determination of the thickness of metallic coatings using the coulometric method by anodic dissolution. The method applies to coatings of metallic, semi-conducting, and non-conducting materials on metallic or non-metallic substrates.
The coulometric method is based on the measurement of the quantity of electricity required to dissolve a known surface area of the coating. An electrochemical cell is used to dissolve the coating at a constant rate, and the amount of electricity required for complete dissolution is measured. The thickness of the coating is then calculated based on the area of the coating and the quantity of electricity used.
ISO 2177 provides guidelines for the selection of the appropriate parameters, such as current density, time, and temperature, to ensure accurate and reproducible measurements. The standard also provides procedures for the calibration of the measurement equipment and the verification of the results.
Overall, this standard provides a reliable and accurate method for the measurement of metallic coating thickness, which is important for quality control and performance evaluation in various industrial applications.
Requirements of ISO 2177:2003
ISO 2177:2003 specifies the requirements for the measurement of coating thickness using the coulometric method by anodic dissolution. Therefore, The standard provides guidelines for the selection of the appropriate measurement parameters, calibration procedures, and verification of results to ensure accurate and reproducible measurements.
Some of the specific requirements of ISO 2177:2003 include:
Selection of an appropriate anodic dissolution solution based on the type of coating being measured and the substrate material.
Use of an electrochemical cell with a reference electrode and a counter electrode to ensure accurate and reproducible measurements.
Also, Application of a constant current density to the coating surface for a specified period of time to ensure complete dissolution of the coating.
Measurement of the amount of electricity required to dissolve the coating, using a coulometer or similar device.
Calibration of the measurement equipment and verification of the results using certified reference materials or other appropriate methods.
Use of appropriate safety measures to prevent personal injury and environmental damage during the measurement process.
Benefits of this ISO Standard
ISO 2177 provides a number of benefits for the measurement of metallic coatings thickness using the coulometric method by anodic dissolution. So, Some of the key benefits include:
Accurate and reliable measurements: The standard provides clear guidelines for the selection of appropriate measurement parameters, calibration procedures, and verification of results. Which ensures accurate and reliable measurements.
Reproducibility: The coulometric method by anodic dissolution provides a reproducible method for the measurement of coating thickness. Which is important for quality control and performance evaluation in various industrial applications.
Applicability: The method can be applied to a wide range of metallic, semi-conducting, and non-conducting coatings on metallic or non-metallic substrates. Making it useful for various industrial applications.
Calibration: The standard provides guidelines for the calibration of measurement equipment and verification of results. Which ensures that the results are traceable to international standards.
Safety: The standard provides guidelines for the safe handling of electrochemical cells and anodic dissolution solutions. Which ensures the safety of personnel and prevents environmental damage.
Who needs ISO 2177:2003?
ISO 2177 is applicable to any organization involved in the measurement of metallic coatings thickness, including manufacturers, testing laboratories, and certification bodies. The standard is particularly useful for industries involved in the production, testing, and evaluation of metallic coatings. Such as the automotive, aerospace, and construction industries.
It is also useful for organizations involved in the maintenance and repair of metallic coatings. In summary, any organization that needs to measure the thickness of metallic coatings can benefit from the standard
If you need more support with ISO 2177, please contact us at +91-8595603096 or support@pacificcert.com
Read About : ISO 2177:2003
