Welcome To Pacific Certifications!
,ISO/IEC 7810:2019 created by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 17, Cards and personal identification.
ISO/IEC 7810:2019 is the fourth edition, it cancels and replaces the third edition (ISO/IEC 7810:2003), which has been technically revised.
ISO/IEC 7810:2019 describes the characteristics for identification cards and the use of such cards for international interchange.
ISO/IEC 7810:2019 specifies the physical characteristics of identification cards including card materials, construction, characteristics and dimensions for four sizes of cards.
ISO/IEC 10373-1 and ISO/IEC 24789-2 specify the test procedures used to check cards against the parameters specified in ISO/IEC 7810:2019
ISO/IEC 7810:2019 specifies the requirements for cards and card interface devices used for identification. It takes into consideration both human and machine aspects and states minimum requirements.
It is the purpose of ISO/IEC 7810:2019 to provide criteria for the performance of cards. No consideration is given within this document to the amount of use, if any, experienced by the card prior to test.
Note* Numeric values in the SI and/or Imperial measurement system in ISO/IEC 7810:2019 have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system can be used, but intermixing or reconverting the two can result in errors. The original design was made using the Imperial measurement system.
If you need more support with ISO/IEC 7810:2019, please contact us at +91-8595603096 or email@example.com