What is ISO 2421:2003 Coated abrasives — Cylindrical sleeves?
ISO 2421:2003 specifies the dimensions and tolerances for cylindrical sleeves used as coated abrasives. These sleeves are typically made of abrasive grains that are bonded to a substrate. Such as paper or cloth, and used for various applications including sanding, grinding, and finishing.
This standard defines the dimensions, tolerances, and maximum operating speeds for cylindrical sleeves of various sizes, and specifies the test methods for determining the properties of the coated abrasive material. It also provides guidance on the marking and labeling of cylindrical sleeves to ensure that they are correctly identified and used.
It is intended for use by manufacturers, suppliers, and users of coated abrasives, and provides a basis for the development of quality control procedures and testing methods. By following this standard, users can ensure that their cylindrical sleeves are of consistent quality. Also, it can be used safely and effectively for their intended applications.
Requirements of ISO 2421:2003
Dimensions and tolerances: The standard defines the dimensions and tolerances for cylindrical sleeves of various sizes. Including the diameter, width, and bore size. These specifications ensure that the sleeves are compatible with the machines and equipment used in various applications.
Maximum operating speeds: ISO 2421:2003 specifies the maximum operating speeds for cylindrical sleeves of different sizes and materials, based on their design and construction. These speeds ensure that the sleeves are used safely and effectively. Without causing damage to the material being worked on or the equipment used.
Bonding strength: The standard requires that the abrasive grains are securely bonded to the substrate material. Such as paper or cloth, to prevent the grains from becoming dislodged during use. The bonding strength is tested using specific methods outlined in the standard.
Abrasive properties: ISO 2421 specifies the test methods for determining the abrasive properties of cylindrical sleeves. Including the grit size, grain distribution, and hardness. These properties determine the effectiveness of the coated abrasive material in various applications.
At last, Marking and labelling: The standard requires that cylindrical sleeves be marked and labelled with specific information. Including the manufacturer’s name and address, the type and size of the sleeve, and any safety warnings or instructions for use.
By following the requirements of ISO 2421:2003, manufacturers and users of cylindrical sleeves can ensure that the coated abrasives are of consistent quality. Also, it can be used safely and effectively for their intended applications.
Benefits of this ISO Standard
Increased quality: The standard defines the dimensions, tolerances, and maximum operating speeds for cylindrical sleeves used as coated abrasives. Ensuring that they are of consistent quality and meet industry standards.
Improved safety: By specifying the maximum operating speeds and requiring adequate bonding strength, the standard helps to ensure that cylindrical sleeves are used safely and effectively. Without causing damage to the material being worked on or the equipment used.
Enhanced performance: The abrasive properties of cylindrical sleeves. Such as grit size and grain distribution, are critical to their performance. Thus, The standard specifies the test methods for determining these properties. Helping manufacturers to produce coated abrasives that are optimized for various applications.
Better compatibility: The dimensional and tolerance requirements of the standard ensure that cylindrical sleeves are compatible with the machines and equipment used in various applications. Reducing the risk of damage or malfunction.
Finally,Increased efficiency: By providing guidance on the marking and labeling of cylindrical sleeves, the standard helps to ensure that they are correctly identified and used. Reducing the risk of errors and increasing efficiency.
Therefore, ISO 2421:2003 provides a framework for the development of quality control procedures and testing methods. Helping manufacturers and users of cylindrical sleeves. To ensure that they are of consistent quality, safe, and effective for their intended applications.
Who needs ISO 2421:2003 Coated abrasives — Cylindrical sleeves?
Manufacturers of coated abrasives: Manufacturers of cylindrical sleeves used as coated abrasives can benefit from ISO 2421 by following its requirements. To ensure that their products meet industry standards and are of consistent quality.
Suppliers of coated abrasives: Suppliers of cylindrical sleeves used as coated abrasives can use this standard. To ensure that the products they supply meet industry standards. Also, they are safe and effective for their intended applications.
Users of coated abrasives: Users of cylindrical sleeves as coated abrasives, such as those in the automotive, aerospace, construction, and metalworking industries, can benefit from ISO 2421:2003. By using products that meet industry standards and are safe and effective for their intended applications.
Also, Regulatory bodies: Regulatory bodies and government agencies can use ISO 2421 as a reference when developing regulations and standards related to the use of cylindrical sleeves as coated abrasives.
ISO 2421:2003 is relevant to any business or organization that produces, supplies, or uses cylindrical sleeves as coated abrasives, and can benefit from following its requirements. To ensure that their products meet industry standards and are safe and effective for their intended applications.
If you need more support with ISO 2421, please contact us at +91-8595603096 or support@pacificcert.com
Read About : ISO 2417:2016
