Looking for EN 10219?

EN 10219

EN 10219
EN 10219

What is EN 10219-2-Cold formed welded steel structural hollow sections – Part 2: Tolerances, dimensions and sectional properties?

This standard covers the properties of cold formed welded steel structural hollow sections. The tolerances, dimensions and sectional properties are discussed in detail. Additionally, the effects of applying different welding procedures on the sectional properties are also covered.

What are the requirements of EN 10219-2?

EN 10219-2 is a European standard that defines the requirements for cold formed welded steel structural hollow sections. The standard specifies the dimensions and tolerances for these sections, as well as their sectional properties.

One of the most important requirements of EN 10219-2-Cold formed welded steel structural hollow sections is that the sections must be able to withstand a minimum tensile strength of 550 MPa. Additionally, the sections must be able to resist shear and axial forces.

If you are manufacturing or selling cold formed welded steel structural hollow sections, it is important to follow the requirements of EN 10219-2. This will ensure that your products meet the expectations of customers and vendors alike.

What are the benefits of EN 10219-2-Cold formed welded steel structural hollow sections?

The main benefits of using EN 10219-2 Cold formed welded steel structural hollow sections are that they have very low distortion, high strength and good corrosion resistance. These sections can be used in a wide range of applications, including buildings, bridges and vessels.

The tolerances specified in EN 10219-2 are very tight, which is important for applications where the section must fit perfectly and without any gaps or irregularities. This specification also requires that the dimensions of the sections be accurate to within 1/10 of a millimetre.

Sectional properties such as Young’s modulus and Poisson’s ratio are also specified in EN 10219-2 Cold formed welded steel structural hollow sections. These values provide information on the stiffness, ductility and toughness of the section.

By understanding the benefits and specifications of EN 10219-2 Cold formed welded steel structural hollow sections, you can choose the best option for your specific application.

Read About: Safety Audit

Who needs this standard?

When it comes to specifying cold formed welded steel structural hollow sections, there are a few factors that need to be taken into account. This includes the tolerances, dimensions and sectional properties.

Tolerances
It is important to specify the tolerances when ordering cold formed welded steel structural hollow sections. These tolerances will define the maximum and minimum dimensions of the section. They will also determine the amount of deflection that can occur in the section.

Dimensions
The dimensions of a cold formed welded steel structural hollow section also need to be specified. These dimensions will define the size, shape and layout of the section. They will also determine how strong the section is.

Sectional Properties
The sectional properties of a cold formed welded steel structural hollow section also need to be specified. These properties will define how stiff, elastic and ductile the section is. They will also determine how much flexural strength the section has.

If you need more support with 10219-2, please contact us at +91-8595603096 or support@pacificcert.com

Contact us to know more about EN 10219

Contact us Form POST Page

Related Certifications

Get in Touch

Email Address

support@pacificcert.com

Call Us

+918595603096

Free Cost Calculator

Free Cost Calculator

Get a rough Estimate for your Required Certification by entering your basic details.

  • Certification Required
  • Company Details
  • Contact Details
Please Select Service Type:

This will close in 0 seconds

Get in touch!

Contact us

This will close in 0 seconds