What is BS EN 12150-1:2015-Glass in Building – Thermally Toughened Soda Lime Silicate Safety Glass – Definition and description?

BS EN 12150-1:2015-Glass in building is part of the EN 12150 series. It establishes the requirements for thermally toughened soda lime silicate safety glass used in buildings

Also, Thermally toughened safety glass is a type of glass that has been treated to increase its strength and resistance to mechanical and thermal stresses. It is designed to reduce the risk of injury in the event of breakage, as it shatters into small, relatively harmless fragments instead of large, sharp pieces.

BS EN 12150-1:2015-Glass in building provides the following information:

1. Scope: The scope of the EN 12150 series and specifies the types of thermally toughened soda lime silicate safety glass covered by the standard.
2. Normative References: The other standards referenced in BS EN 12150-1:2015, which are essential for the application of the standard.
3. Terms and Definitions: The terms and definitions relevant to thermally toughened soda lime silicate safety glass.
4. Glass Types: The types of thermally toughened soda lime silicate safety glass based on their intended use, properties, and characteristics.
5. Visual Quality: The requirements for visual quality, such as surface flaws and blemishes that may be present on the glass.
6. Physical and Mechanical Properties: The physical and mechanical properties of glass should meet to be considered thermally toughened safety glass.
7. Durability: The resistance of the glass to environmental factors and aging, ensuring that the glass retains its mechanical and optical properties over time.
8. Dimensional Tolerances: The dimensional tolerances for the thermally toughened safety glass to ensure it meets the necessary size and thickness requirements.
9. Classification: Based on the testing and properties, the glass is classified into different classes for various applications.
10. Marking: The information should be marked on the glass to indicate its compliance with the standard and its classification.
11. Appearance and Color: This section describes the appearance and color of the thermally toughened soda lime silicate safety glass.

In summary, BS EN 12150-1:2015 is an important standard for manufacturers, suppliers, and users of thermally toughened soda lime silicate safety glass as it ensures the quality, safety, and appropriate use of such glass in building applications.

Requirements of BS EN 12150-1:2015-Glass in Building

EN 12150-1:2015 specifies the requirements for thermally toughened soda lime silicate safety glass used in buildings. This standard is part of the EN 12150 series, which covers various aspects of thermally toughened glass. The requirements outlined in BS EN 12150-1:2015 include the following:

1. Glass Composition: The glass must be made from soda lime silicate glass, a type of glass commonly used in architectural applications.
2. Glass Types: BS EN 12150-1:2015 defines several types of thermally toughened soda lime silicate safety glass based on their intended use, such as flat glass, curved glass, and glass with surface coatings.
3. Visual Quality: The standard sets requirements for the visual quality of the glass, ensuring that it is free from significant defects that could impair its functionality or aesthetics.
4. Mechanical Properties: BS EN 12150-1:2015 establishes specific mechanical properties that the thermally toughened safety glass must meet. These properties include the glass’s resistance to mechanical stress, thermal stress, and impact resistance.
5. Physical Properties: The standard outlines various physical properties that the glass should possess, such as light transmission, thermal insulation, and sound reduction capabilities.
6. Fragmentation: One of the essential safety aspects of thermally toughened safety glass is its behavior upon breakage. The standard sets requirements for the fragmentation of the glass to ensure that it breaks into small, relatively harmless fragments.
7. Durability: BS EN 12150-1:2015 addresses the glass’s durability, considering factors like resistance to weathering, humidity, and environmental exposure.

8. Dimensional Tolerances: The standard specifies dimensional tolerances for the glass, ensuring that it meets the required size and thickness specifications.
9. Appearance and Color: EN 12150-1:2015 describes the acceptable appearance and color characteristics of the thermally toughened soda lime silicate safety glass.
10. Classification: Based on the test results and properties, the standard classifies thermally toughened safety glass into different classes, allowing users to select the appropriate glass type for specific applications.
11. Marking: Appropriately marked glass with relevant information, including its compliance with the standard and classification.

Furthermore, these requirements ensure that thermally toughened soda lime silicate safety glass used in buildings meets specific quality, safety, and performance standards. Manufacturers and suppliers must adhere to these requirements to produce glass products that comply with the standard and provide the necessary safety features for building applications. Users and specifiers can rely on the standard to make informed choices regarding the selection and use of thermally toughened glass in their projects.

Benefits of BBS EN 12150-1:2015-Glass in building

The benefits of BS EN 12150-1:2015, which specifies the requirements for thermally toughened soda lime silicate safety glass used in buildings, are numerous and significant. These benefits apply to manufacturers, suppliers, specifiers, and end-users of thermally toughened glass.

Here are some of the key benefits:

1. Safety: One of the primary benefits of thermally toughened safety glass is its enhanced safety features. In the event of breakage, the glass shatters into small, relatively harmless fragments, reducing the risk of injury to occupants and bystanders.
2. Compliance with Standards: Following BS EN 12150-1:2015 ensures that the thermally toughened safety glass meets specific quality and safety standards, giving confidence to manufacturers, suppliers, and end-users that the glass performs as intended.
3. Application Flexibility: The standard defines various types of thermally toughened safety glass suitable for different applications, including flat glass, curved glass, and glass with coatings. This offers flexibility and options to architects and designers for a wide range of building projects.
4. Mechanical and Thermal Strength: The thermally toughened glass, meeting the requirements of the standard, exhibits improved mechanical strength and thermal resistance compared to untreated glass. This makes it suitable for demanding building applications.
5. Durability: The standard addresses the glass’s durability, ensuring that it remains stable and retains its properties under various environmental conditions, contributing to the glass’s long service life.
6. Fragmentation Control: EN 12150-1:2015 specifies fragmentation requirements, which are crucial for safety during breakage. The controlled fragmentation ensures that broken glass poses minimal risk of injury.

7. Visual Quality: The standard sets requirements for the visual quality of the glass, ensuring that it meets aesthetic expectations and enhances the building’s appearance.
8. Conformance Verification: By implementing the standard, manufacturers and suppliers can demonstrate their commitment to quality, safety, and compliance, leading to increased confidence from customers and stakeholders.
9. Building Regulation Compliance: The use of thermally toughened safety glass meeting the requirements of the standard can help buildings comply with relevant safety and building regulations.
10. Customer Confidence: For end-users, such as building owners and occupants, the use of EN 12150-1:2015 compliant glass provides peace of mind and confidence in the safety and quality of the building’s glazing.
11. Impact Resistance: The standard addresses the impact resistance of thermally toughened safety glass, making it suitable for areas requiring protection against accidental impacts.
12. Sound Reduction: Depending on the glass type, thermally toughened safety glass can offer sound reduction properties, contributing to a quieter and more comfortable indoor environment.

Overall, BS EN 12150-1:2015 benefits the entire construction industry by setting high standards for thermally toughened soda lime silicate safety glass used in buildings, leading to increased safety, durability, and customer satisfaction.

Who needs BS EN 12150-1:2015-Glass in Building

BS EN 12150-1:2015 specifies the requirements for thermally toughened soda lime silicate safety glass used in buildings, is relevant and applicable to various stakeholders in the construction and glass industries. The standard is also essential for:

1. Manufacturers: Glass manufacturers need to comply with BS EN 12150-1:2015 to produce thermally toughened soda lime silicate safety glass that meets the specified quality, safety, and performance standards. Adherence to the standard ensures consistency and reliability in the glass production process.
2. Suppliers and Distributors: Suppliers and distributors of thermally toughened safety glass must ensure that the products they offer to the market meet the requirements of the standard. This ensures that the glass they provide is of appropriate quality and safety for building applications.
3. Architects and Designers: Architects and designers play a crucial role in specifying the types of glass to be used in building projects. By referencing the standard, they can select appropriate thermally toughened safety glass that meets the required performance and safety standards for specific building applications.
4. Construction Companies: Construction companies that incorporate glass in their projects, whether for windows, facades, balustrades, or other applications, need to ensure that the glass used complies with the relevant safety and performance standards outlined in EN 12150-1:2015.

5. Building Owners and Managers: Building owners and facility managers should be aware of the type of glass used in their properties, particularly in concerned safety areas. By specifying or verifying compliance with BS EN 12150-1:2015, they can ensure the installation of thermally toughened safety glass in critical areas, such as entrances, partitions, and overhead glazing.
6. Regulatory Authorities: Regulatory bodies responsible for building codes and safety standards may reference or mandate compliance with the standard for specific building applications. Adherence to the standard helps ensure compliance with relevant building regulations.
7. Safety Inspectors and Auditors: Safety inspectors and auditors may assess buildings and construction projects for compliance with safety standards, including the use of appropriate safety glass. The standard also serves as a reference for evaluating the glass’s conformity and suitability.
8. Glass Testing and Certification Bodies: Entities responsible for testing and certifying glass products can use this standard as a basis for evaluating the glass’s properties and performance.

In summary, anyone involved in the design, manufacture, supply, installation, or inspection of thermally toughened soda lime silicate safety glass used in building applications can benefit from EN 12150-1:2015 as a guideline and reference for ensuring glass quality, safety, and compliance with standards.

Also, Pacific Certifications is accredited by the ABIS to issue management system certification and product certifications

What is EN 12150-2:2004-Glass in building – Thermally toughened soda lime silicate safety glass – Part 2: Evaluation of conformity/Product standard?

EN 12150-2:2004 specifies the requirements for thermally toughened soda lime silicate safety glass used in buildings.

Moreover, EN 12150-2:2004 specifically focuses on the evaluation of conformity for thermally toughened soda lime silicate safety glass and serves as a product standard. It provides guidelines for manufacturers and certification bodies to assess and also verify that the glass products comply with the requirements outlined in EN 12150-1:2015.

The standard covers the following aspects:

1. Scope: EN 12150-2:2004 defines the scope of the product standard and its relationship with other standards in the EN 12150 series.
2. Normative References: This section lists the other standards referenced in EN 12150-2:2004, which are essential for the evaluation of conformity.
3. Terms and Definitions: The standard includes a list of terms and their definitions relevant to the evaluation of conformity for thermally toughened soda lime silicate safety glass.
4. Conformity Requirements: EN 12150-2:2004 specifies the requirements that the thermally toughened safety glass products must be compliant with EN 12150-1:2015 also.
5. Evaluation of Conformity: The standard outlines the procedures and methods for evaluating conformity, including the criteria for testing and inspection.
6. Initial Type Testing: Manufacturers must conduct initial type testing to demonstrate that their glass products meet the specified requirements. The standard provides guidance on the type testing process.
7. Factory Production Control (FPC): The standard describes the requirements for establishing as well as maintaining Factory Production Control to ensure consistent conformity of the glass products.
8. Product Marking and Documentation: EN 12150-2:2004 details the information that must be included on the product markings and the documentation required to support the evaluation of conformity.
9. Certification of Conformity: This section provides guidance on the certification process for thermally toughened soda lime silicate safety glass products, as well as the involvement of third-party certification bodies.

Therefore, EN 12150-2:2004 plays a crucial role in ensuring that thermally toughened safety glass products meet the specified quality, safety, and performance standards. Manufacturers use this standard as a guide to assess their glass products’ conformity, and certification bodies use it as a basis for evaluating and certifying the glass’s compliance with BS EN 12150-1:2015-Glass in building

At last, If you need more support with BS EN 12150-1, please contact us at +91-8595603096 or support@pacificcert.com 

Read About: BS EN 1279-1