ISO 10487-1:1992 Passenger car radio connections — Part 1: Dimensions and general requirements
In this article, we’ll be discussing the ISO 10487-1:1992 standard for passenger car radio connections. This standard specifies the requirements for the connection of radios in passenger cars. We’ll go over the general requirements as well as the dimensions specified in the standard.
What is ISO 10487
ISO 10487 is an international standard that defines a set of requirements for the connection of car radios to vehicles. It was first published in 1996 and has been revised several times since then.
The standard defines two types of connectors: Type 1 and Type 2. Type 1 connectors are used for power and speaker connections, while Type 2 connectors are used for data connections.
Type 1 connectors are typically found in older vehicles, while Type 2 connectors are found in newer vehicles.
There are four main types of ISO 10487 connectors:
- 20-pin connector: This connector is used in vehicles with ISO 10487-compliant head units. It consists of 20 pins that are arranged in two rows of 10 pins each.
- 40-pin connector: This connector is used in vehicles with ISO 10487-compliant head units. It consists of 40 pins that are arranged in four rows of 10 pins each.
- 44-pin connector: This connector is used in vehicles with ISO 10487-compliant head units. It consists of 44 pins that are arranged in four rows of 11 pins each.
- 62-pin connector: This connector is used in vehicles with ISO 10487-compliant head units
What are the requirements of ISO 10487
The ISO 10487 standard specifies the requirements for passenger car radio connections. It covers the dimensions and general requirements of the connectors, as well as the pin assignment of the ISO 10487 connector.
The standard was first published in 1995 and was last updated in 2016.
The ISO 10487 connector is used for the connection of audio and video signals in cars. It is a rectangular connector that has 24 pins arranged in three rows of eight pins each.
The connector is typically used for the connection of head units, CD changers, and navigation systems to the car’s electrical system.
The ISO 10487 standard defines two types of connectors: Type A and Type B. Type A connectors are used for audio signals only, while Type B connectors are used for both audio and video signals.
Type A connectors have a maximum of four pins assigned to each signal, while Type B connectors have a maximum of eight pins assigned to each signal.
Some of the most important requirements of the ISO 10487 standard include:
- The connector must be resistant to vibration and shock.
- The connector must be able to withstand temperatures ranging from -40°C to +85°C.
- The connector must
What are the benefits of ISO 10487
There are many benefits to the ISO 10487 standard, including:
- Improved compatibility between different types of car radios and other audio devices.
- A more consistent and uniform connection between devices.
- Easier installation of aftermarket car radios.
- Reduced electromagnetic interference.
The ISO 10487 standard is widely used in the automotive industry and has been adopted by major manufacturers such as Volkswagen, Audi, BMW, Mercedes-Benz, and Porsche.
[11:02 am, 02/08/2022] E-Certifications: ISO 10628-1:2014 Diagrams for the chemical and petrochemical industry — Part 1: Specification of diagrams
In the process industry, the use of diagrams is widespread. They are an essential tool for the analysis, design, operation and maintenance of process plant. The purpose of this standard is to provide a basis for the consistent application of diagrams in the chemical and petrochemical industries.
What is ISO 10628-1:2014
ISO 10628-1:2014 is the first part of the ISO 10628 series which provides requirements and guidance for the specification of diagrams for the chemical and petrochemical industry.
This part of ISO 10628 specifies the general rules for the content, presentation and update of process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs) and utility distribution flow diagrams (UDFDs).
The main purpose of these diagrams is to document process plants and to support their operation, maintenance and modification.
What are the requirements of ISO 10628-1:2014
The standard ISO 10628-1:2014 provides requirements and guidelines for the preparation of flow diagrams for the chemical and petrochemical industry.
The standard applies to all diagrams that show processes, process units and interconnections between them. This includes block flow diagrams (BFDs), process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs) and general arrangement drawings (GAs).
ISO 10628-1:2014 does not apply to process control system documentation or circuit diagrams for electrical or electronic equipment.
The standard defines the different types of information that should be included in a flow diagram, as well as the symbols and abbreviations that can be used. It also provides guidance on how to prepare and present the information in a clear and concise way.
What are the benefits of ISO 10628-1:2014
The benefits of ISO 10628-1:2014 are many and varied. This standard provides a framework for the specification of diagrams for use in the chemical and petrochemical industry, and as such, it can be used by organizations of all sizes in this sector.
Some of the key benefits of this standard include:
- It helps to ensure the consistency of diagrams across different organizations.
- It can be used to help create new diagrams or to improve existing ones.
- It can help to reduce the risk of errors in diagrams.
In addition, ISO 10628-1:2014 is easy to use and understand, and it is available in both English and French.
If you need more support with ISO 10487, please contact us at +91-8595603096 or firstname.lastname@example.org